Chamber Clean is specifically formulated to have the following properties:

• Antistatic - to prevent dust accumulation
• Coating - to act as a barrier
• Cleaning - to remove stubborn flecks, mirror dust and fabrics
• Lubricant - to reduce flecks by reducing friction

Chamber Clean solution is filtered to less than 0.2 micron, 40 times smaller than 8 micron pixel size. Visible Dust does not recommend using other cleaning solutions which may contaminate the sensor.

Instruction:

Step 1. Place your camera in Sensor-Cleaning mode to lock up the mirror.

Step 2. Take out one swab. Apply 1-2 drops of Chamber Clean solution to it. Wipe the chamber wall gently while the camera is FACING DOWNWARD . This is to avoid splashing Chamber Clean solution on the sensor. Use as many swabs to cover the whole area. AVOID OPTICS AND MIRRORS .

Step 2. If you find the sensor messy from splashing while cleaning, use the Sensor Clean solution to clean the sensor followed by the Sensor Brush . Otherwise proceed with the Sensor Brush . A persistent spot is due to liquid nature of the spot that is not removed by the Sensor Brush .

Chamber Clean is specifically formulated to have the following properties:

• Antistatic - to prevent dust accumulation
• Coating - to act as a barrier
• Cleaning - to remove stubborn flecks, mirror dust and fabrics
• Lubricant - to reduce flecks by reducing friction

Chamber Clean solution is filtered to less than 0.2 micron, 40 times smaller than an 8 micron
pixel size. Visible Dust does not recommend using other cleaning solutions, which may contaminate the sensor.