The camera connecting cord is not included in the scope of delivery. It is available separately. Please click here.

Yongnuo RF-602 Wireless Camera, Flash & Sync Trigger 100m

Wireless remote for cameras and flashes - 100m range
The RF-602 triggers cameras as well as flash units. It's very reliable and offers great quality. A test with a Canon Speedlite 430EX resulted in no failure.

Camera triggering
The RF-602 allows you to trigger cameras from a large distance. You can:

• trigger a single camera as you use the sender as a remote
• trigger a second in sync with the first.

Under optimal conditions the range of the trigger is up to 100m. The release button of the sender focuses the camera when you press the button halfway down and triggers the camera when it's pushed all the way down. Time exposure and continuous shooting is possible if the camera modes are set accordingly.

Flash triggering
Off-camera flash units or studio flashes can be triggered with the RF-602. The receiver comes with a hot shoe for mounting a flash unit and a 1/4" thread for mounting it on a tripod. Flash units with a 6.3mm jack plug can be attached to the receiver with the included release cord. The delivery includes an adapter for flash units with a 3.5mm jack plug.

Technical Details:
Type: FSK 2.4GHz wireless trigger
Range: approx. 100m
Channel: 16 (adjustable at sender and receiver)
Power supply: sender 1x CR2 3V, receiver 2x AAA
Release per battery: approx. 20 000
Max. trigger voltage: 6V
Dimensions: sender approx. 3.8 x 4.8 x 2.7cm, receiver approx. 3.3 x 7.8 x 2.6cm

Scope of Delivery:
RF-600TX sender
RF-602RX receiver
Connecting cord with 6.3mm jack plug
6.3mm/3.5mm adapter

Note:
This wireless flash trigger does not support TTL.

Underside with tripod thread and flash foot

Receiver connected with flash unit

Triggering two cameras