Diffusor and Reflektor Lim's Easy Bounce for (D)SLR pop-up flash

in stock
Shipping within 24 hours

Note:
Not natively compatible with Canon cameras. The support base has to be sanded slightly sideways, so that the internal flash fires in spite of proof of hot shoe.

Description0

Lim's Easy Bounce Diffusor and Reflektor for internal pop-up flash

Diffusor and Reflektor for Standard ISO shoe mount

The Easy Bounce is diffuser and reflector for the internal pop-up flash of a camera at the same time. The holder slides into the hotshoe of the camera, the diffuser-reflector surface is placed in front of the flash.

Diffusor

The diffuser is mounted vertically in front of the pop-up flash of the camera. It scatters the hard light of the flash, reduces harsh shadows and softens the reflections on the skin and eyes.

Reflektor

Mounted at a 45 degree angle in front of the flash, the reflective surface reflects the light from the flash and distribute it evenly in the surrounding area, thus the illumination of the subject is extremely uniform.

Mounting on the camera

The Easy Bounce has a shoe-mount adapter which is pushed into the shoe mount of the camera. While the internal flash is popped up, the holder of the diffusor / reflector is pushed into the shoe-mount adapter. The reflector surface shows towards the flash. If the diffuser is used, you remove the reflection surface on the backside of the diffusor and move it upwards.

Small, lightweight and always with you

The smart 2-in-1 design is space saving and practical. Quickly mounted, with surprising effect. Supplied in a carrying case the Easy Bounce is - on the one hand - protected from scratches and on the orher hand easy to put in any bag - even in your pocket.

Note:
Only for cameras with standard ISO shoe mount (not for Sony/Minolta).

Technical Details:

Material: Plastic
Dimensions (all in all): approx. 10 x 5,5 x 0,8cm
Dimensions (Reflektor): approx. 5 x 5,5cm
Dimensions (Diffusor): approx. 4,4 x 5,5cm
Weight: approx. 12g

Component parts of the Easy Bounce:

Removing the protection film:

in stock
Shipping within 24 hours