Phottix Tetra PT-04 II Wireless Flash Trigger

Flash trigger for wireless triggering compact and studio flash units
The Phottix Tetra PT-04 II wireless flash trigger has a range of 30m. The photographer is largely independent from the position of the flash.

Tiltable receiver with hot shoe and PC socket
The receiver has a hot shoe for attaching a compact flash unit and a PC socket for a studio flash unit. It mounts on an adjustable shoe mount or a tripod/stand. It has a 1/4“ tripod socket and flash foot.

Sender suitable for all hot shoes with a center contact
The sender mounts on the hot shoe of the camera. It’s compatible for all cameras with a center contact hot shoe (not Sony/Minolta).When triggering the camera the sender transmits a signal to the receiver which triggers the flash unit. The flash can also be triggered without the camera via a release button at the top side of the sender.

4 channels selectable
The sender and the receiver have both four channels. That way with one sender and additional receivers you can trigger more flash units independently from each other.

Technical Details:
Channels: 4
Frequency: 433MHz
Range: up to 30m
Flash synchronization: 1/125s to 1/250s (depends on camera & flash unit)
Battery (sender): 23A 12V (included)
Battery (receiver): 2x AAA (included)
Battery life: up to 20 000 flash releases

Scope of Delivery:
Sender
Receiver
2 AAA batteries

Advice:
The flash trigger is designed for flash units with a trigger voltage of 12V or less. Works with numerous flashes but not with Nissin flash units.

This article is suitable for the following models:
	e.g. Canon Speedlite 580EX (II), 550EX, 540EZ, 520EZ, 430EX (II), 430EZ, 420EX, 420EZ, 380EX Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24 Marumi DPZ420AF, D35AF, D728AF Olympus FL-50, FL-40, FL-36 Sigma EF-500 DG Super, EF-500 DG ST, EF-430 Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT