Timer Remote Cord JJC TM-A for Canon 50D 40D 5D Mark II

• robust case, intelligent control
• easy and intuitively programmable
• very handy
• two-step release button (focus & release)
• self-timer: any delay between 0s - 99h 59min 59s
• interval shooting - e.g. one exposure every 12s
• precise exposure time - e.g. 4min 32s
• continuous shooting: 1 to 399 or infinite
• modes combinable
• illuminated display
• key lock

Timer Remote with many features
This remote release features a self-timer, precise exposure time, interval and continuous shooting. All features are combinable. The timer can be set to any time you want, for example: one exposure every 4 seconds or one exposure with a 37 seconds delay.

The timer has a two-step release button. Press the button halfway down to focus and all the way down to release. For manual long exposure you can lock the release. Then the timer counts up until the exposure is finished.

Easy and intuitive programming
The timer has a robust case. It's easy to control. You can select and program the modes with the cursor buttons.

Technical Details:
Delay: 1s - 99h 59min 59s
Long exposure: up to 99h 59min 59s
Interval: 0s - 99h 59min 59s (1s increments)
Continuous shooting: 1-399 or infinite
Power: 2x AAA batteries
Dimensions: 11 x 4,5 x 2,2cm
Weight: 72g
Cable length: 90cm

Scope of Delivery:
TM series timer
2 AAA batteries

Advice:
For long exposures you have to set the camera to "BULB" mode.

For interval shots you have to set the number of exposures and the interval between exposures that you want.

Auto bracketing is not possible.