DHAP Super Soft Fabric 1.0x Orange Series

This Double layer High Absorbency fabric is super soft and made of super thin fibers. It is used in cleaning delicate surfaces such as space telescopes. The fabric is woven to be non-shedding. Its high absorbency capacity makes it ideal for the surface cleaning of delicates optics. The fabric has also a patented folding design that creates a softer edge compared to a hot sealing process. Compatible with VDust Formula� and Smear Away� . The patented mini-channel, with contour, provides an even saturation of the paddles surface while preventing pooling and vertical flow at the edge. This reduces streaks associated with traditional flat surface paddles. The mini-channels also provide the extra reservoir to absorb the excessive liquid and prolonging the moisture life of the swab during the cleaning process. For use with the 1.0x sensor size range (24mm) 12 per pack.

1. Refer to your camera's manual on how to expose the sensor.
2. Brush the sensor surface with Sensor Brush� or use VisbleDust hurricane blower ro remove any contaminants.
3. Add 2 to 4 drops of VDust Formula�
4. Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
5. Wipe across the sensor with gentle pressure "Once". Discard the swab.
6. Release the camera shutter.
7. Proceed with checking the image.
8. Allow the sensor to dry out completely. Highly Recommended to use the Sensor Brush� for a complete cleaning.
9. Repeat if necessary.

(Shortly again available! Orders by email or telephone)