Ultra MXD-100 (Fabric) 1.3x Green Series

This ultra thin multi fiber fabric has a patented folding design to create a softer edge compared to a hot sealing process, yet designed to be compatible with a wide range of our solutions ( VDust Formula� , Sensor Clean� , Smear Away� ). The patented mini-channel, with contour, provides an even saturation of the paddles surface while preventing pooling and vertical flow at the edge. This reduces streaks associated with traditional flat surface paddles. The mini-channels also provide the extra reservoir to absorb the excessive liquid and prolonging the moisture life of the swab during the cleaning process. For use with the 1.3x sensor size range (20mm). 12 per pack.

Instruction:

1. Refer to your camera's manual on how to expose the sensor.
2. Brush the sensor surface with Sensor Brush� or use VisbleDust hurricane blower ro remove any contaminants.
3. Add 2 to 4 drops of VDust Formula�, Sensor Clean� or Smear Away�
4. Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
5. Wipe across the sensor with gentle pressure "Once". Discard the swab.
6. Release the camera shutter.
7. Proceed with checking the image.
8. Allow the sensor to dry out completely. Highly Recommended to use the Sensor Brush� for a complete cleaning.
9. Repeat if necessary.