|
Ultra MXD-100 (Fabric) 1.5x - 1.6x Green Series
This ultra thin multi fiber fabric has a patented folding design to create a softer edge compared to a hot sealing process, yet designed to be compatible with a wide range of our solutions ( VDust Formula� , Sensor Clean� , Smear Away� ). The patented mini-channel, with contour, provides an even saturation of the paddles surface while preventing pooling and vertical flow at the edge. This reduces streaks associated with traditional flat surface paddles. The mini-channels also provide the extra reservoir to absorb the excessive liquid and prolonging the moisture life of the swab during the cleaning process. For use with the 1.5x - 1.6x sensor size range (16mm). 12 per pack.
Instruction:
- Refer to your camera's manual on how to expose the sensor.
- Brush the sensor surface with Sensor Brush� or use VisbleDust hurricane blower ro remove any contaminants.
- Add 2 to 4 drops of VDust Formula�, Sensor Clean� or Smear Away�
- Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
- Wipe across the sensor with gentle pressure "Once". Discard the swab.
- Release the camera shutter.
- Proceed with checking the image.
- Allow the sensor to dry out completely. Highly Recommended to use the Sensor Brush� for a complete cleaning.
- Repeat if necessary.
|
