Visible Dust Sensor Clean�
- Antistatic - to prevent dust accumulation
- Prevents dust build up
- Strong cleaning property
- Compatible with other applicators
- Leaves no residue or film
- Non-alcoholic, Non-Hygroscopic, Non-flammable, Non-Toxic & Non-corrosive to the sensor
- Streak Free
- Travel Safe
It is wise to use Sensor Clean� instead of alcohol. Sensor Clean� is specifically formulated to remove small stains and contaminates off of your sensor. For contaminiates that don't come off, VisibleDust recommends using Smear Away� . Use Sensor Clean� with VisibleDust Green Series Swabs .
Instruction:
|
- Refer to your camera's manual on how to expose the sensor.
- Brush the sensor surface with Sensor Brush� or use VisbleDust hurricane blower ro remove any contaminants.
- Add 2 to 4 drops of VDust Formula�, Sensor Clean� or Smear Away�
- Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
- Wipe across the sensor with gentle pressure "Once". Discard the swab.
- Release the camera shutter.
- Proceed with checking the image.
- Allow the sensor to dry out completely. If needed, use the Sensor Brush� for complete cleaning.
- Repeat if necessary.
|
|
