VisibleDust Sensor Clean Sensor Wet Cleaning Liquid 8ml
Cleaning liquid for removing water stains - anti-dust and anti-fogging
Sensor Clean is the specialist for removing water stains which may be caused by condensation on the sensor surface. The liquid provides an anti-static barrier for the prevention of dust accumulation, it has anti-fogging capabilities and prevents streaking as it cleans. If you intend to work in a humid or arid climate, Sensor Clean will provide a buffer against vapour build up and dust collection. It can be used with the swabs from the Green Series and works safely and effectively for ITO coated sensors the same as for non ITO coated sensors.
Professional top product - Made in Canada
Sensor Clean belongs to a range of professional sensor cleaning products which result from many years of research and application. That is why VisibleDust products are the best that you'll find on the market.
1. Expose the camera sensor as described in the camera manual.
2. Use a sensor brush or dust blower to remove dust particles which may or may not be on the camera sensor.
3. Drop three drops of liquid on the swab (left, right, center)
4. Wait until the liquid is evenly dispersed.
5. Carefully clean the camera sensor using the wet swab. Wipe the swab only in one direction.
6. Rotate the swab by 180 degrees and wipe the sensor once again using the other side of the swab.
7. Take a test picture in order to check, if there are any residues left.
8. Repeat the steps above if necessary.