VisibleDust Smear Away�
Great in removing very small smears, however if the smear on your sensor covers a larger area, we recommend using the more absorbent, cotton-tipped swabs. Use Smear Away� with VisibleDust Green Series Swabs.
Instruction:
- Refer to your camera's manual on how to expose the sensor.
- Brush the sensor surface with Sensor Brush� or use VisbleDust hurricane blower ro remove any contaminants.
- Add 2 to 4 drops of Smear Away�
- Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
- Wipe across the sensor with gentle pressure "Once". Discard the swab.
- Release the camera shutter.
- Proceed with checking the image.
- Allow the sensor to dry out completely. If needed, use the Sensor Brush� for complete cleaning.
- Repeat if necessary.
|
